Basic of Assembly
2 - 60
Electric parts and Main motor unit
Basic of Assembly
Basic of Assembly
5
Attachment of Main PCB assy
1. Set the main PCB assy to the main PCB holder, and secure it with the three hooks.
2. Attach the main PCB assy and the two clips to the arm bed with the four screws (screw, pan (S/P
washer) M4x10DB).
3. Connect the each connector to the lower side of main PCB assy.
*Key point
• Refer to
"Wiring of Lower side of Main PCB"
.
Screw, Pan (S/P washer) M4X10DB
Main PCB holder
Clip
Screw, pan
(S/P washer)
M4x10DB
Clip
Main PCB assy
Hook
Hooks
Summary of Contents for BLDY
Page 2: ......
