Basic of Assembly
2 - 63
Main frame and covers
Basic of Assembly
Basic of Assembly
2
Attachment of LED PCB holder A/B
1. Align the positioning hole of LED PCB assy: work area with the boss of LED PCB holder A, and attach
the LED PCB assy: work area with the screw (screw, pan (S/P washer) M3x7). Attach the LED PCB
holder A to the arm bed with the screw (taptite, bind S M4x10).
2. Align the positioning hole of LED PCB assy: work area with the boss of LED PCB holder B, and attach
the LED PCB assy: work area with the screw (screw, pan (S/P washer) M3x7). Attach the LED PCB
holder B to the arm bed with the screw (taptite, bind S M4x10).
3. Connect the two connectors of lead wire assy LED1 to the two LED PCB assy: work areas. Pass the
lead wire assy LED1 through the two guides.
*Key point
• Refer to
"Wiring of Lead wire assy LED1"
.
4. Connect the each lead wire to the main PCB assy, and clip them together.
*Key point
• Refer to
"Wiring of Upper side of Main PCB"
.
Taptite, Bind S M4X10
Screw, Pan (S/P washer) M3X7
LED PCB holder B
Guides
LED PCB holder A
LED PCB assy:work area
Lead wire assy LED1
Clip
Taptite, bind
S M4x10
Screw, pan
(S/P washer) M3x7
Taptite, bind
S M4x10
LED PCB assy:
work area
Summary of Contents for BLDY
Page 2: ......
