BASIC EMBROIDERY
43
2
Embroidering the pattern repeatedly
After creating the repeated pattern, rehoop the fabric in
the embroidery frame and keep embroidering for the next
pattern.
a
Create the repeated pattern with the thread mark at
the center of the end of the pattern. (page 42)
b
Touch ,
then .
c
Touch
, and then press the “Start/Stop”
button to start embroidering.
When embroidering is finished, the thread mark is
embroidered with the last thread color.
d
Remove the embroidery frame.
e
Rehoop the fabric in the embroidery frame.
f
Attach the embroidery frame to the machine, and then
touch
in the embroidery screen.
g
Touch
to set the starting point to the left side of the
pattern.
h
Touch .
i
Align the needle drop point with the thread mark on
the fabric.
j
If the pattern position cannot be aligned using the
positioning keys, rehoop the fabric, and then try again
to align the position with the positioning keys.
k
Remove the stitched thread mark.
l
Touch
, and then press the “Start/Stop”
button to start embroidering.
Memo
• Using the optional magnetic sash frame, the fabric
can be easily rehooped without removing the frame
from the machine. For details, refer to the manual
included with magnetic sash frame.
Note
• Adjust the position of the fabric so that the
embroidering area for the next pattern is within the
embroidering area of the embroidery sheet.
1
Pattern embroidered first
2
Position of pattern to be embroidered next
3
Embroidering area of embroidery sheet
Note
• After you have aligned the position of the combined
border pattern, do not rotate the pattern in the
embroidery screen. If the pattern is rotated in the
embroidery screen after alignment, the pattern will
not be properly aligned with the thread mark or
starting point.
