BASIC EMBROIDERY
63
2
Checking the embroidery pattern
The carriage moves and shows the pattern position. Watch the
embroidery frame closely to make sure the pattern will be
embroidered in the right place. At this time, using the
Embroidery Crosshair Positioning Laser function, the pattern
position is projected on the fabric and you can check it more
clearly.
a
Make sure that the Embroidery Crosshair Positioning
Laser on/off key appears as
.
The Embroidery Crosshair Positioning Laser indicates
the needle drop point.
b
Touch .
The embroidery frame moves to show the
embroidery area.
Carefully watch the movement of the embroidery frame
and check that the embroidery will stitch in the desired
location and that the embroidery frame does not hit the
presser foot.
In addition to checking the thread colors, information such
as stitch count, stitching time and various other editing
options can be performed in the embroidery screen.
(page 58)
1
Shows the number of stitches, the embroidering time,
and the number of thread color changes.
2
Display the embroidering time of each thread colors. To
return to the thread color display, touch this key again.
3
When starting the machine or cutting the threads, touch
this key to unlock the machine, and then press the
“Start/Stop” button or thread trimming button.
4
Shows the embroidering order for the thread colors, or
embroidering time of each thread color.
5
Return to the pattern editing screen.
(page 24):
An instruction video is available for this topic.
UPPER THREADING
CAUTION
• When
(unlock key) in the
embroidery screen is touched, the “Start/Stop”
button begins flashing in green and the
machine can start embroidering. If the upper
threading is being performed or the needle is
being threaded, be careful that the machine is
not accidentally started, otherwise injuries
may result.
5
4
3
1
2
