Zipper Insertion
75
3
0
Close the zipper, turn over the fabric, and then
baste the other side of the zipper to the fabric.
1
Basting stitching
a
Attach the presser foot holder to the other pin
of zipper foot “I”.
If the presser foot holder was attached to the
right pin in step
6
, change it to the left pin.
1
Pin on the left side
2
Needle drop point
b
Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the
side of the presser foot.
1
Right side of fabric
2
End of zipper opening
3
Reverse stitches
4
Beginning of stitching
5
Basting stitching
c
When you are about 5 cm (2 inches) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), raise
the presser foot lever, and then open the
zipper and continue sewing.
d
Remove the basting stitching.
●
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
1
I
2
1
1
2
3
4
5
CAUTION
Summary of Contents for Crafter's Choice BLCC2
