26
ATD: Auto Tension Dial Selection
SL: Stitch Length
DF: Differential Feed
L / C: Upper Looper driving clutch position
Stitch Type
Tension Dial Selected : As select ATD option,
the tension dial are set automatically.
*When option 2, 3, 6, 8 selected, use converter.
*When option 1, 10, and 11 selected, turn upper knife down, move seam width finger knob to setting R, and change front cover
attached cover (A) into (B).
*Auto tension settings are based on medium weight fabric and standard # 60 polyester spun thread. It can satisfy most requirements
for sewing. If using different thread number or fabric and the result is not you expected, please adjust in small increments.
Chain Stitch
2-Thread Wrapped
Edge Overlock
2-Thread Overlock
3-Thread Overlock
3-Thread Flatlock
3-Thread Mock Safety
Stitch Overlock
4-Thread Mock Safety
Stitch Overlock
4-Thread Chain Stitch-
2-Thread Overlock
5-Thread Chain Stitch-
3-Thread Overlock
Cover Stitch
Narrow/ Wide
Triple Cover Stitch
Three - Thread
Rolled Hem
1
2
3
4
5
6
7
8
9
10
11
12
4.0mm
6.0mm
4.0mm
6.0mm
4.0mm
6.0mm
4.0mm
6.0mm
2.8mm
5.6mm
5.6mm
4.0mm
Page
Blue
39
40
40
41
41
42
42
43
43
44
45
46
47
47
50
50
51
54
Green
Red
Purple
D
G
D
E
E
B
A
F
F
G
A
I
B
A
K
H
J
C
N
2
2
2
2
N
N
2
2
2
N
N
N
N
N
N
N
1
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
C
L
L
L
L
L
L
L
L
L
L
L
L
L
C
C
C
L
Needle
Position
37
A
T
D
S
L
D
F
L
/
C
2 . HANDY REFERENCE CHART
3
converter
converter
Yellow
narrow
wide
narrow
wide
narrow
wide
narrow
wide
narrow
wide
narrow
wide
Handy Reference Chart
ATD: Auto Tension Dial Selection
DF: Differential Feed
* When option 2, 3, 6, 8 selected, use converter.
* When option 1, 10, and 11 selected, turn upper knife down, move seam width finger knob to setting R, and change front cover
attached cover (A) into (B).
* Auto tension settings are based on medium weight fabric and standard #60 polyester spun thread. It can satisfy most requirements
for sewing. If using different thread number or fabric and the result is not what you expected, please adjust in small increments.
SL: Stitch Length
L/C: Upper Looper driving clutch position
converter
converter
converter
converter
Instruction
Manual
Reference
Page
