30
Connecting Patterns to be Joined
Along an Edge
Greater design variations can be created by sliding the
patterns being connected.
The following procedure describes how to use this
function to connect patterns so they are joined along an
edge. Before connecting the patterns, the basting
function will be used to measure the distance that the
pattern will be slid.
A: First pattern
B: Second pattern
■
Measuring the Distance That the Pattern
Will Be Slid
a
Set “Embroidery Basting Distance” in the
settings screen to “0.0”.
b
Select the pattern whose slide distance is to
be measured.
c
Continue to the sewing screen, and then press
to select the basting function.
→
changes to
.
Summary of Contents for Ellisimo & Ellisimo BLSO-BF2
Page 1: ......
