9
EN
G
LIS
H
o
Gently pull the upper thread to bring the
bobbin thread up through the needle plate.
→
A loop of the bobbin thread comes out through the
hole in the needle plate.
p
Insert tweezers through bobbin thread loop
and pull bobbin thread above the needle
plate.
q
Align the upper thread and bobbin thread,
and then pull out about 10 cm (approx.
4 inches) of the threads and pass them under
the presser foot toward the rear of the
machine.
r
Install the the bobbin cover with tabs.
a
Bobbin cover with tabs
→
This completes the upper and lower threading.
Note
• If utility stitches are to be used, refer to “CREATING
BOBBIN WORK (SEWING)” on page 10. If
embroidery patterns are to be used, refer to
“CREATING BOBBIN WORK (EMBROIDERY)” on
page 13.
