manualshive.com logo in svg

Baby Lock Ellisimo BLSO, Instruction And Reference Manual

Discover the possibilities with the Baby Lock Ellisimo BLSO, a state-of-the-art sewing and embroidery machine. Enhance your crafting experience by downloading the free Instruction And Reference Manual directly from 88.208.23.73:8080. Ensure optimal use of your Ellisimo BLSO by accessing the essential manual today.

Share
Download
background image

TROUBLESHOOTING

320

Embroidery pattern 
does not sew out 
correctly 

Thread is twisted. 

Use scissors, etc., to cut the twisted thread 
and remove it from the race, etc. 

—

Fabric was not inserted into the frame correctly 
(fabric was loose, etc.). 

If the fabric is not stretched tight in the frame, 
the pattern may turn out poorly or there may 
be shrinkage of the pattern. Set the fabric into 
the frame correctly. 

200

Stabilizing material was not attached. 

Always use stabilizing material, especially 
with stretch fabrics, lightweight fabrics, fabrics 
with a coarse weave, or fabrics that often 
cause pattern shrinkage. See your authorized 
retailer for the proper stabilizer.

197

There was an object placed near the machine, 
and the carriage or embroidery frame hit the 
object during sewing. 

If the frame bumps something during sewing, 
the pattern will turn out poorly. Do not place 
anything in the area where the frame may 
bump it during sewing. 

210

Fabric outside the frame edges interferes with 
the sewing arm, so the embroidery unit cannot 
move. 

Reinsert the fabric in the embroidery frame so 
that the excess fabric is away from the sewing 
arm, and rotate the pattern 180 degrees.

200

Fabric is too heavy, so the embroidery unit 
cannot move freely. 

Place a large thick book or similar object 
under the arm head to lightly lift the heavy 
side and keep it level.

—

Fabric is hanging off the table. 

If the fabric is hanging off the table during 
embroidery, the embroidery unit will not move 
freely. Place the fabric so that it does not hang 
off the table or hold the fabric to keep it from 
dragging. 

210

Fabric is snagged or caught on something. 

Stop the machine and place the fabric so that 
it does not get caught or snagged. 

—

Embroidery frame was removed during sewing 
(for example, to reset the bobbin). The presser 
foot was bumped or moved while removing or 
attaching the embroidery frame, or the 
embroidery unit was moved. 

If the presser foot is bumped or the 
embroidery unit is moved during sewing, the 
pattern will not turn out. Be careful when 
removing or reattaching the embroidery frame 
during sewing. 

221

Stabilizer is incorrectly attached, for example, it 
is smaller than the embroidery frame.

Attach the stabilizer correctly.

197

Machine does not 
operate 

There is no pattern selected. 

Select a pattern. 

79, 146, 186, 261

“Start/Stop” button was not pushed. 

Press the “Start/Stop” button. 

3

Main power switch is not turned on. 

Turn the main power to ON. 

12

Presser foot is not lowered. 

Lower the presser foot. 

3

“Start/Stop” button was pushed with the foot 
controller attached. 

Remove the foot controller, or use the foot 
controller to operate the machine. 

61

The “Start/Stop” button was pressed while the 
machine is set for the sewing speed controller to 
control the zigzag stitch width.

Use the foot controller instead of the “Start/
Stop” button to operate the machine, or set 
the Width control to OFF in the Sewing 
settings.

22, 61

All keys and buttons have been locked by 

.

Press 

 to unlock all keys and 

buttons.

54, 56

Embroidery unit does 
not operate 

There is no pattern selected. 

Select a pattern. 

186, 261

Main power switch is not turned on. 

Turn the main power to ON. 

12

Embroidery unit is not attached correctly. 

Reattach the embroidery unit correctly. 

184

Embroidery frame was attached before the unit 
was initialized. 

Perform the initialization process correctly. 

184

Nothing happens, 
even if the LCD 
display is pressed 

The screen has been locked. 

Press either of the following keys to unlock the 

screen.  

—

The fabric feeds in the 
opposite direction.

The feed mechanism is damaged.

Contact your nearest authorized retailer.

—

The LCD screen is 
fogged up.

Condensation has formed on the LCD screen.

After a while, the cloudiness will disappear.

—

Problem

Cause

Solution

Page

Summary of Contents for Ellisimo BLSO













































































































































































































































































































































































Reviews:

No comments

Related manuals for Ellisimo BLSO

Baby Lock Solaris VISION BLSA3 Quick Reference Manual preview
Solaris VISION BLSA3
Brand: Baby Lock Pages: 20
Baby Lock Anna BL20A Instruction And Reference Manual preview
Anna BL20A
Brand: Baby Lock Pages: 76
Janome HD3000 Servicing Manual preview
HD3000
Brand: Janome Pages: 28
JUKI MO-6800DD10 Series Instruction Manual preview
MO-6800DD10 Series
Brand: JUKI Pages: 47
Reliable MSK-8220B Specification preview
MSK-8220B
Brand: Reliable Pages: 1
GBC GBC STL1000 Instruction Manual preview
GBC STL1000
Brand: GBC Pages: 43
White SEW E-Z W338 Instruction Manual preview
SEW E-Z W338
Brand: White Pages: 12
Nobles UltraShine Specifications preview
UltraShine
Brand: Nobles Pages: 1
Clarke Vantage 14 Original Instruction preview
Vantage 14
Brand: Clarke Pages: 76
Zeck Audio STAC Vision 1.5 Owner'S Manual preview
STAC Vision 1.5
Brand: Zeck Audio Pages: 15
Baby Lock Aria BLAR Instruction And Reference Manual preview
Aria BLAR
Brand: Baby Lock Pages: 200
Innovatech P32ND Owner'S Manual preview
P32ND
Brand: Innovatech Pages: 25
Nilfisk-ALTO SCRUBTEC 866 Operator'S Manual And Parts List preview
SCRUBTEC 866
Brand: Nilfisk-ALTO Pages: 27
JUKI DDL-8700 Instruction Manual preview
DDL-8700
Brand: JUKI Pages: 59
Brother 4234DT Handbook preview
4234DT
Brand: Brother Pages: 80
Singer 147-29 Parts List preview
147-29
Brand: Singer Pages: 53
NaOClean DES-WA50 User Manual preview
DES-WA50
Brand: NaOClean Pages: 20
Square Scrub EBG-20/R Owner'S Manual preview
EBG-20/R
Brand: Square Scrub Pages: 9

Brands by name

Popular brands

Load more brands