106
UTILITY STITCHES
■
For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch
22
.
a
7 mm (1/4 inch)
Memo
z
To change the width of the seam allowance
(needle position), adjust the stitch width. For
details, refer to “Adjusting the stitch width”
(page 56).
■
Using the optional 1/4 inch quilting foot
If the 1/4 inch quilting foot is used, seams can be
sewn with a seam allowance of 6.4 mm (1/4 inch).
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
Attach the 1/4 inch quilting foot.
• For details, refer to “Replacing the presser
foot” (page 42).
Select stitch
3
.
Align the mark at the upper edge of the 1/4
inch quilting foot with the upper edge of the
fabric.
Align the right edge of the fabric with the right
edge of the narrow part of the 1/4 inch quilting
foot.
a
Mark on 1/4 inch quilting foot
b
Beginning of stitching
When sewing with a seam allowance, align the
left edge of the narrow part of the 1/4 inch
quilting foot with the fabric edge.
a
Seam (3.2 mm (1/8 inch))
Start sewing.
When the end of the stitching is reached, stop
the sewing machine.
Sew until the mark at the lower edge of the 1/4
inch quilting foot aligns with the lower edge of
the fabric.
a
6.4mm (1/4 inch)
b
End of stitching
c
Mark on 1/4 inch quilting foot
1
1
2
1
2
3
1
Summary of Contents for Ellure PLUS BLR3
