GETTING READY
42
Replacing the Presser Foot
This section describes how to replace the presser foot.
Presser foot precautions
Be sure to observe the following precautions concerning the presser feet.
CAUTION
Replacing the presser foot
Replace the presser foot as described below.
Press
(“Needle Position” button) once or
twice to raise the needle.
a
“Needle Position” button
Turn off the sewing machine.
CAUTION
Raise the presser foot lever.
a
Presser foot lever
X
The presser foot is raised.
Press the black button at the back of the
presser foot holder.
a
Black button
b
Presser foot holder
X
The presser foot holder releases the presser
foot.
●
Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the needle to bend or break.
●
Only use presser feet designed specifically for this sewing machine. Use of any other presser
foot may result in injuries or damage to the machine.
●
Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
/
(“Start/Stop”
button) is accidentally pressed and the
machine starts sewing.
1
a
a
b
Summary of Contents for Ellure PLUS BLR3
