2
Sewing
51
Starting to sew
Once you are ready to start sewing, you can start the
sewing machine. The sewing speed can be adjusted
using either the sewing speed controller or the foot
controller.
Note
z
When the foot controller is plugged in,
/
(“Start/Stop” button) cannot be used
to start or stop sewing.
■
Using the operation button
Sewing can be started and stopped using the
operation button
/
(“Start/Stop” button).
Slide the sewing speed controller to the left or
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
a
Sewing speed controller
Press
/
(“Start/Stop” button) once.
a
“Start/Stop” button
X
The machine starts sewing.
• If you continue to hold the
/
(“Start/
Stop” button) pressed immediately after the
sewing starts, the machine will sew at a slow
speed.
When the end of the stitching is reached, press
/
(“Start/Stop” button) once.
X
The machine stops sewing with the needle
down (in the fabric).
When you have finished sewing, press
(“Needle Position” button).
X
The needle is raised.
Cut the threads.
• For details, refer to “Cutting the thread” (page
54).
Note
z
This machine will automatically stop when
the bobbin becomes almost empty. When
the machine stops, replace the bobbin
thread, and then press
/
(“Start/Stop”
button) to begin sewing again.
■
Using the foot controller
Sewing can be started and stopped using the foot
controller.
Turn off the sewing machine.
When connecting the foot controller, be sure to
turn off the sewing machine in order to prevent
the machine from accidentally being started.
1
1
Summary of Contents for Ellure PLUS BLR3
