60
EMBROIDERY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Appliquéing
Prepare the base fabric and the appliqué fabric
(appliqué piece). Press
/
(Settings key), and
set the thread color display to NAME OF COLOR, so
“APPLIQUE MATERIAL”, “APPLIQUE POSITION”
and “APPLIQUE” are displayed on the screen.
a
Select an appliqué pattern.
b
When “APPLIQUE MATERIAL“ is displayed on
the screen, apply iron-on stabilizer to the back
of the appliqué piece fabric, and stretch it on
the embroidery frame.
c
Lower the presser foot lever, and press
/
(“Start/Stop” button).
X
The cut-out for the appliqué piece is sewn,
and the machine stops.
a
Cut-out line
b
Appliqué piece fabric
X
“APPLIQUE POSITION“ will be displayed
on the screen.
d
Remove the fabric from the embroidery frame,
and cut it out along the cut-out line.
Cut carefully along the stitching and remove
the thread.
• If it is not cut right on the stitching, it will not
be finished neatly.
e
Stretch the base fabric on the embroidery
frame.
f
Set up the thread for appliquéing.
g
Lower the presser foot lever, and press
/
(“Start/Stop” button).
X
The position for the appliqué is stitched, and
the machine stops.
a
Appliqué position
b
Base fabric
X
“APPLIQUE“ will be displayed on the
screen.
h
Apply a thin layer of fabric glue or spray
adhesive to the back of the appliqué piece, and
attach it in the appliqué position.
1
2
1
2
Summary of Contents for emore BLMR
