76
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the Embroidery Foot
This section describes how to attach the embroidery foot.
Attaching the embroidery foot “Q”
Attach the embroidery foot when embroidering. Have
the included embroidery foot “Q” and a screwdriver
ready.
a
Embroidery foot bar
b
Caught by the presser foot holder screw
CAUTION
a
Press
(“Needle Position” button) once or
twice to raise the needle.
a
“Needle Position” button
X
The needle goes up.
b
Turn off the machine.
CAUTION
c
Raise the presser foot lever.
a
Presser foot lever
X
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d
Hold the embroidery foot with your right
hand, as shown.
Hold the embroidery foot with your index
finger wrapped around the lever at the back of
the foot.
a
Lever
●
Always use the embroidery foot “Q”
when embroidering. If the wrong presser
foot is used, the needle may hit the
presser foot and break or bend.
2
1
1
●
Before replacing the embroidery foot, be
sure to turn off the machine, otherwise
injuries may occur if
/
(“Start/
Stop” button) is accidentally pressed and
the machine starts embroidering.
a
a
Summary of Contents for emore BLMR
