Set up the machine for 2-thread flatlock-wide but the needle
threading path is different for this technique.
1. Insert a size 90 top stitch needle in left overlock needle posi-
tion.
2. Engage the threading lever in the threading position.
3. Place a heavy decorative thread that will be used in the needle
on far left spool pin and thread the needle thread through upper
looper thread path (below illustration).
4. Engage the threading lever in the serging position, pull the
thread out the upper looper tube and continue to thread the
needle as illustrated.
5. Thread Maxilock thread in the lower looper.
6. Swing the subsidiary looper into place on the upper looper.
7. Place water-soluble stabilizer on top of the fabric, along the
edge.
8. Stitch along the edge of the fabric. (Fig. A)
9. When finished stitching, pull the water-soluble stabilizer to the
right of the fabric (fig. B). This will pull the stitching to the edge
and will look like a blanket stitch (fig. C).
For a blanket decorative stitch, follow the suggested settings and
threading illustration below.
2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
30
Blanket Stitch - Decorative Stitch
A
B
C
NEEDLES
left
size 90 Top Stitch
Needle
LENGTH
4.0
WIDTH
7.5
STITCH
SELECTOR
A
WAVE
SELECTOR
OVERLOCK
Summary of Contents for Enlighten BLE3ATW-2
Page 1: ......
Page 56: ...EI 31 2 E BLE3ATW 2TA...
