APPENDIX
————————————————————————————————————————————————————————————————————————————
274
Winding the bobbin
Prepare the bobbin and the spool of bobbin thread.
Use cotton or spun polyester bobbin thread (from
74 dtex/2 to 100 dtex/2).
1
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
1
Groove in the bobbin
2
Spring on the shaft
2
Set the thread spool on the spool pin.
1
Thread spool
2
Spool pin
Note
●
When using a small spool, remove the
spool cushion and set the spool directly
onto the spool pin. Also use the included
spool cap to keep the small spool stable.
3
Pass the thread through the hole in the left of
the thread guide toward the front of the
winder.
1
Hole in the thread guide
4
Pass the thread around the tension disc as
shown in the illustration. Make sure that the
thread is correctly fed into the tension disc.
1
Tension disc
Summary of Contents for Enterprise BNT10L
