EMBROIDERING TUTORIAL
—————————————————————————————————————————————————————————————————
58
4
Pass the thread through the hole in the
number 1 upper thread guide and pull the
thread toward you.
1
Hole in upper thread guide
5
Hold the thread with both hands, and then
pass it under the guide plate from the right.
1
Upper thread guide plate
6
Wind the thread clockwise once around the
number 1 thread tension disc.
1
Thread tension disc
2
Pass thread in a clockwise direction at this
location on the tension disks.
• Make sure that the thread is securely
positioned in the thread tension.
Note
●
All thread tension discs are threaded in
clockwise direction.
7
Lead the thread along the thread path and
around the correct thread guide pins as
indicated on the machine, then slip the
thread under the number 1 middle thread
guide plate from the right.
1
Thread guide pin
2
Middle thread guide
• The path from the upper thread guide
around the thread tension disc and to the
middle thread guide (steps
6
through
7
)
may differs depending on the spool
number. Passing the thread through the
thread guide pins is designed to prevent the
thread from becoming tangled. Be sure to
follow the thread path indicated on the
machine.
Summary of Contents for Enterprise BNT10L
