BEFORE EMBROIDERING
112
Attaching the Embroidery Unit
a
Turn off the machine, and then remove the
flat-bed attachment.
b
Slide the tab on the cover of the connection
port in the direction of the arrow to open the
cover.
c
Insert the embroidery unit connector into the
connection port, and then lightly push in the
embroidery unit until it snaps into place.
a
Connection port
b
Embroidery unit connector
d
Turn on the machine.
→
A message appears in the screen.
CAUTION
• Do not move the machine with the embroidery unit
attached. The embroidery unit could fall off and
cause injury.
• Keep your hands and foreign objects away from the
embroidery carriage and frame when the machine is
embroidering. Otherwise, injury may result.
• If the embroidery unit could not be initialized
correctly, a buzzer will sound. If this happens, go
through the initialization process again. This is not a
malfunction.
Note
• Do not touch the embroidery unit connector,
otherwise damage to the connector pins or the
machine may result.
• Do not apply extreme force to the embroidery unit
carriage or pick up the unit by the carriage,
otherwise damage to the embroidery unit may
result.
• Store the embroidery unit in its storage box/case.
Note
Be sure to turn off the machine before attaching the
embroidery unit, otherwise damage to the machine
may result.
Note
Be sure to close the cover of the connection port when
the embroidery unit is not being used.
Note
• Make sure that there is no gap between the
embroidery unit and the sewing machine, otherwise
the embroidery pattern may not be sewn correctly.
Be sure to fully insert the connector into the
connection port.
• Do not push on the carriage when attaching the
embroidery unit to the machine, otherwise damage
to the embroidery unit may result.
a
b
Summary of Contents for esante BLN
Page 1: ......
Page 9: ...8...
Page 47: ...USEFUL FUNCTIONS 46...
Page 189: ...English 882 U72 XD0547 051 Printed in Taiwan...
