background image

"IMPORTANT SAFETY INSTRUCTIONS"

When using overlock machine, basic safety precautions should always be followed, 

including the following.

Read all instructions before using this overlock machine.

DANGER- 

To reduce the risk of electric shock.

1. The overlock machine should never be left unattended when plugged in. Always unplug this overlock

machine from the electrical outlet immediately after using and before cleaning.

2. Always  unplug  before  replacing  light  bulb.  Replace  bulb  with  same  type  rated  15  watts/110  volts  in

110V/120V area. (15 watts 230 volts in 220V/240V area.)

WARNING-

To reduce the risk of burns, fire, electric shock, or injury to persons.

1. Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by or

near children.

2. Use this overlock machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

3. Never operate this overlock machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the overlock machine to the nearest authorized
dealer or service center for examination, repair, electrical or mechanical adjustment.

4. Never operate the overlock machine with any air openings blocked. Keep ventilation openings of the over-

lock machine and foot controller free from the accumulation of lint, dust, and loose cloth.

5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol "O" position which represents off, then remove plug

from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the overlock machine needle.
11. Always use the proper needle plate. The wrong needle plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle(s) causing it to break.
14. Switch the overlock machine to the symbol "O" position when making any adjustments in the needle area,

such as threading needle, changing needle, threading looper, or changing presser foot, and the like.

15. Always unplug the overlock machine from the electrical outlet when removing covers, lubricating, or when

making any of the user servicing adjustments mentioned in the instruction manual.

16. Keep fingers away from moving parts, especially the area near the blades.
17. Please note that on disposal, this product must be safely recycled in accordance 

with relevant National legislation relating to electrical / electronic products. If in
doubt please cont act your retailer for guidance.

18. The appliance is not intended for use by young children or infirm persons without 

supervision.

19. Young children should be supervised to ensure that they do not play with the appliance.

"SAVE THESE INSTRUCTIONS"

"This overlock machine is intended for household use."

European
Union only

Summary of Contents for evolve BLE8W












Reviews: