Gallant XL User Manual
| 15
Touchscreen Display
The Gallant XL comes with one 7-inch touchscreen front display.
To install the front display
1. Locate the three screws for the touchscreen
bracket. Line up the white touchscreen bracket
and the black connector piece with the holes
on top of the Gallant XL. Insert and tighten the
screws with the included hex wrench.
2.
For the front display, locate the four 4-40 screws
and a small Phillips screwdriver (not provided).
You’ll also need the display with the hinges
attached to the bottom row of connectors on
the back of the display.
3.
Insert the 4-40 screws into the openings on the
display’s metal hinge. Align the screws in the
hinge with the holes on the display bracket. Use
the small Phillips screwdriver to fully tighten the
screws.
4.
Plug the USB mini B cable (with 90° connection),
coming out of the top front cover, into the
bottom of the display. This cable provides
power and signal connection from the machine
to the display. The USB connection on the
bottom right of the display is used for updating
the display and the machine software.
Â
IMPORTANT:
Note the other connections
on the bottom of the display for power and
audio are not functional.
Â
IMPORTANT
: If you have Pro-Stitcher Lite, you will install the Pro-Stitcher Lite tablet computer to
the top of the machine, and the touchscreen display will still be attached. See the instructions that
come with Pro-Stitcher Lite for more information about installing the tablet.
