Gallant XL User Manual
| 43
Alerts
Alert screens display an icon that indicates an issue with the operation of the machine. The Alert might
indicate a minor problem you can remedy on your own, like a loose cable. Other times you may need to
seek help an authorized Baby Lock retailer or Baby Lock's Product Support team.
An icon will be displayed on the screen along with a code number that appears in the upper right corner
of the screen. This number will help a Baby Lock retailer diagnose the issue. The number will not mean
anything to you, but make note of this and relay it to your authorized Baby Lock retailer.
The icons that can be displayed are shown below.
Over/under voltage: This icon appears when the machine has detected
a voltage that is out of range for an extended period of time.
Power cycle the machine by turning the machine off at the power
switch, wait 10 seconds, and then turn back on. If the trouble repeats,
please contact your authorized Baby Lock retailer for service.
Over-current: This icon may appear when the machine has hit an
obstruction or is unable to sew through the fabric.
Check your quilt for any obstruction, such as a pin, and remove it. Check
that the handwheel can rotate freely then clear the screen by pressing
any key. If the trouble repeats, please contact your authorized Baby Lock
retailer.
Obstruction: This icon indicates there may be thread or lint trapped in
the bobbin race.
Check for thread or lint in the bobbin race. You may need to have
someone turn the handwheel while you watch the bobbin race. Remove
the obstruction and oil the hook. Check that the handwheel can rotate
freely. Clear the screen by pressing any key.
Motor Hall Sensor: This icon indicates the hall sensors did not change
state correctly.
In the unlikely situation where the control system has detected an
incorrect motor sensor sequence, please contact your authorized Baby
Lock retailer for repairs.
