S
E
R
G
I
N
G
W
I
T
H
F
A
B
R
I
C
15
Thread Delivery System
Stitch Selector
Re-threading Needles
Re-threading Loopers
The Baby Lock Imagine revolutionizes the way a serger works with its Thread Delivery System. You no
longer have to manually adjust the tension settings for the type of stitch you are serging. Select the type
of stitch you wish to serge, the Imagine will automatically feed the correct amount of thread through the
loopers and thread guides to form a perfect stitch every time.
The stitch selector controls the thread delivery system and is located on
the right front side of the machine. To select a stitch setting, move the
stitch selector lever to A, B, C, or D.
A - For Wide Overlock Stitches.
B - For Right Needle Wave Stitch, and right needle overlock stitches.
C - For narrow stitches, and Rolled Wave Stitch using right needle.
D - For 3-Thread Rolled Hem stitch.
See chart on last page for stitch selection settings.
If a thread breaks, raise the presser foot and pull the broken thread out from under the foot. Open the
front cover, depress the machine lock button and set the looper threader selector to U or L for the looper
being threaded. Re-thread the machine above the threading port, leaving an 18inch (40cm) thread tail.
Thread the looper as usual and move lock button release lever to the right. Close the front cover and sew
a test sample. Refer to page 13 for further information.
Note:
When re-threading your Baby Lock Imagine using the "Jet-Air Threading" feature, make sure that
the previous thread that was in the looper (tube) is completely removed. This will eliminate any chance
of the previous thread obstructing the flow of the air when re-threading the machine.
If a needle thread breaks, raise the presser foot, remove the broken thread and rethread the needle thread
guides. Open the front cover, depress the machine lock button. Select the "R" or "L" for the needle being
rethreaded. Use the needle threader for exact and easier threading. Refer to pages 13 for further
information.
Summary of Contents for imagine BLE1AT-2
Page 1: ...Model BLE1AT 2 Instruction Manual Vol 1 0...
Page 54: ...EI E BLE1AT 2 TA...
