INSERT ZIPPERS AND PIPING
Stitch Name
Pattern
Stitch
Length Dial
[mm(inch)]
Stitch
Width Dial
[mm(inch)]
Straight Stitch
0-4
(0-3/16)
3.5
(center)
(1/8)
You can use the zipper foot to sew different types of zippers,
and can easily position it to the right or left side of the needle.
When sewing the right side of the zipper, attach the presser foot
holder to the left pin of zipper foot. When sewing the left side of the
zipper, attach the presser foot holder to the right pin of the zipper
foot.
Zipper Foot
1
Right pin for sewing the left side of the zipper
2
Left pin for sewing the right side of the zipper
3
1
2
3
1
Needle stitches to the left of foot.
2
Needle stitches to the right of foot.
Align the right side or the left side of the zipper foot
pin with the presser foot holder, lower the presser
foot lever to attach the foot.
3
To insert zippers, consult the zipper package for instructions
on how to prepare zipper placket and place zipper. To sew
close to the zipper on the right side, snap the zipper foot onto
the presser foot holder on the left side so the needle passes
through the opening on the left side of the foot.
Snap the foot onto the presser foot holder on the other side of
foot to sew close to the left side of the zipper.
To insert piping, purchase pre-made piping or cover cording with a bias strip of fabric
using the zipper foot snapped on to the right side of the presser foot holder. Place the
piping between two layers of fabric. Stitch with the piping next to the foot, so the stitching
is tight against the cord.
Turn the handwheel by hand to make sure the needle does
not hit the zipper foot before you start sewing. Choosing a
different stitch will cause the needle to hit the presser foot
and break, which may damage machine or cause personal
injury.
Make sure the needle does not hit the zipper during sewing.
If the needle hits the zipper, the needle may break, which
may damage machine or cause personal injury.
CAUTION
1
2
3
-27-
1
