19
Selection Type Function
Lights On/Off/
Lighting consists of multiple LED light clusters (bulbs) mounted on the underside of the front
Spot/Part
handles. Twelve LED light clusters are included with the Baby Lock Jewel. Up to ten
additional light clusters can be purchased and inserted into expansion light ports.
Press
Select
to toggle through four white LED lighting options.
•
Lights on:
Turns all bulbs on.
•
Lights off:
Turns all bulbs off.
•
Lights spot:
Engages the three clusters closest to the machine on each side of the handles. All
other lights are turned off.
•
Lights part:
Engages partial lighting by turning on all bulbs except the spot lights. The three
clusters closest to the machine are turned off.
Diagnostics
Allows an authorized representative to run diagnostics on the Baby Lock Jewel.
Set Up
Alarm Mode:
Allows the user to set overspeed alarm (used only in Stitch-Regulated mode).
Overspeed:
Alarm beeps to indicate that the machine is no longer sewing in regulation mode
because the machine is being moved too fast. Press
Select
to toggle between.
Exit Menu:
Press
Select
to return to the
Set Up
menu.
My Speed:
Allows the user to select the stitch speed at which the machine starts each time it is
turned on in manual mode. Press the Up or Down to select your speed. Press
Select
to return to the
Set Up
menu. This speed can be overridden with the handle up/down
speed buttons.
Light Mode:
Used to selectively turn on/off LED light clusters (bulbs) nearest to the machine
on each side of the handle.
Use the Up or Down arrows to point to the left rear, right rear, left front, or right front bulbs.
The light positions on the menu screen correspond to the bulb position on the handle. Press
Select
to
turn a bulb on/off. An asterisk indicates the bulb is on. The small circle indicates the bulb is off.
To return to the Set Up menu, press the Up or Down arrow points to Exit and press Select.
Counters:
Counts the total number of stitches on the machine over the life of the machine and
during a time period defined by the user.
•
L (Lifetime):
Stitch count over the life of the machine. This count can not be reset.
•
T (Trip):
Can be used to count the number of stitches in a project or over a specific time
frame defined by the user. To reset the trip stitch count, use the Up or Down arrows to
point to Reset and press
Select
.
To return to the
Set Up
menu, press the Up or Down arrow points to
Exit
and press
Select
.
Walking On/Off:
Turns the walking stitch feature on/off. When the
Up/Down
button on the
handle is pressed and held, the machine will make slow stitches until the
Up/Down
button is
released. The walking stitch can be used to tie off stitches at the beginning and end of quilting.
Exit Menu:
Press
Select
to exit setup and return to the main menu.
