20
Using the Handle Buttons
The following functions take effect by pressing and then quickly
releasing the button (
Diagram G and Photo 17
):
Baby Lock Jewel
Stitch Regulator Setup
To use regulated mode it must be selected from the
Settings Menu
.
1.
Scroll until you can see
Quilt Mode
from the
Menu
and press
Select
(
Photo 18
).
2.
Choose
Regulated
from the
Quilt Mode Menu
and press
Select
.
3.
The menu prompts you to select the number of
Stitches Per Inch
you desire (
Photo 19
). Select any
number from 4 to15 stitches per inch by pressing
the up/down arrows (the larger the number, the
smaller the stitch). Press
Select
to return to the
main
Menu
.
4.
The
Display
will now indicate on the first line
that the machine is in
Regulated Mode
and will
display the
Stitches Per Inch
.
5.
From the front or rear handles, press
Start
and
begin moving the machine. The needle will imme-
diately start stitching. As you move the machine,
your stitches will be regulated to the length set in
step 3. If you press
Start
and don’t move the ma-
chine, the needle will start stitching, but will stop
after 3-4 stitches.
Photo 18
Photo 17
Diagram G
Photo 19
Selection Type Function
Needle Up/
Allows the user to manually move the
Needle Down
needle one ½ stitch or one full stitch at a
time. Half or full stitch is set by the user
on the settings menu.
Start/Stop
Starts and stops the machine.
Speed Up
By pushing the plus sign, the speed of
the machine will gradually increase.
The % of machine speed is displayed on
the Menu bar ranging from 10-100%.
(Manual mode only)
Speed Down
By pushing the minus sign, the speed
of the machine will gradually decrease.
The % of machine speed is displayed on
the Menu bar ranging from 10-100%.
(Manual mode only)
