26
q
z
c
x
w
q
z
c
x
Drawing up the Bobbin Thread
z
Raise the presser foot and hold the needle thread
lightly with your left hand.
q
Needle thread
x
Turn the handwheel slowly toward you one complete
turn. Bring the bobbin thread up by pulling the needle
thread as illustrated.
q
Needle thread
w
Bobbin thread
c
Pull 4˝ (10 cm) of both threads back and under the
presser foot.
Needle Threader
z
Raise the needle to its highest position.
Pull down the needle threader knob as far as it will go.
q
Threader knob
x
Turn the knob in the direction of the arrow in the
illustration, then insert hook into the needle eye.
Lead the thread around guide and under hook.
w
Hook
e
Guide
c
Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through the
needle.
Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle, a blue tip needle or a #11 to #16 ball point
needle. Thread size 50 to 90 should also work well.
q
w
e
