30
y
u
Adjusting Stretch Stitch Balance
If the stretch stitch patterns are uneven when you sew
on a particular fabric, correct them by turning the stitch
length dial.
If the patterns are drawn out, correct them by setting the
dial to the “–” side.
If the patterns are compressed, correct them by setting
the dial to the “+” side.
Stitch Width Dial
Turn the stitch width dial to set the desired stitch width at
the setting mark .
The higher the number, the wider the stitch width.
y
Pattern selector dial
u
Setting mark
NOTE:
Raise the needle above the fabric, when you turn the
stitch width dial.
