Baby Lock Kinetic Frame, Assembly Instructions Manual

Baby Lock Kinetic Frame Assembly Instructions    23

11-7:  Repeat steps 11-5 and 11-6 to add a 

second pole end to the other open end of the 

pole assembly just built and one pole end to 

each of the remaining 3 pole assemblies  

(Fig. 11-5). Repeat the process and set the 

two poles with two pole ends aside as the 

batting storage pole and the idler pole.

Short-Bolt Ratchet-Wheel Assembly

11-8: Check the short-bolt ratchet wheel 

assembly to ensure that it matches Fig. 11-6.

11-9: Loosen the nut at the end of the short-

bolt ratchet wheel assembly until it nearly 

reaches the end of the bolt.

11-10: Holding onto the outside of the pole 

end, push the nut end of the bolt towards the 

opposite end of the assembly until the inside 

pole end short-bolt wedge slides out (in similar 

fashion to Step 11-3). This makes the outside 

diameter of the outside pole end smaller and 

ready to be inserted into the end of the pole 

assembly.

Long-Bolt Ratchet-Wheel Assembly

11-12: Add the hand wheel assembly and 

hand wheel insert as shown in Fig. 11-7, 

aligning the three tabs on the hand wheel insert 

with the three notches on the outside pole end. 

If the three tabs are not properly aligned, the 

hand wheel will spin freely, independent of 

the pole. 

Outside Pole End

Inside Pole End Short Bolt Wedge

Short Bolt Wedge

Ratchet Wheel

Large Washer

V Bearing

Small Washer

Hex Nut

Fig. 11-6

Short-bolt ratchet assembly comes 

pre-assembled. Exploded diagram is 

for reference only.

Fig. 11-7

Step 11

Pole End Assembly (continued)

Long Bolt Ratchet 

Wheel and Hand 

Wheel Assembly

Ratchet Wheel

Hand Wheel

Small Washer

Lock Nut

Large Washer

V Bearing

Outside Pole End

Hand Wheel

Insert

Tab

Hole

Long bolt ratchet wheel assembly comes pre-assembled 

without hand wheel and hand wheel insert. Exploded 

diagram is included for reference.

Fig. 10-1

Fig. 9-6

Fig. 2-1

Fig. 1-1

Batting Storage & Idler Pole

Fig. 11-5

Fig. 10-1

Fig. 9-6

Fig. 2-1

Fig. 1-1

X2