background image

VARIOUS EMBROIDERING FUNCTIONS

74

Creating an Appliqué Piece

Creating an appliqué piece is convenient for fabrics that 
cannot be embroidered or when you wish to attach an 
appliqué to a garment.

Creating an Appliqué Piece

The following pattern will be used to create an appliqué 
piece.

a

Select the pattern, and edit it if necessary.

b

Touch 

 and then, touch 

.

c

Specify the distance between the pattern and the 

appliqué outline, and then touch 

.

The pattern and appliqué outline are grouped.

Note

• Felt or denim fabrics are recommended to make 

the appliqué piece. Depending on the pattern and 
fabric used, lighter weight fabrics may cause the 
stitching to appear smaller.

• For best results, be sure to use stabilizer material 

for embroidering.

• When making appliqué pieces, do not use the 

optional border embroidery frame. Depending on 
the pattern density and fabric used, shrinkage of 
the stitching may occur.

Note

• Finish combining and editing the pattern before 

selecting the appliqué setting. If the pattern is 
edited after selecting the appliqué setting, the 
appliqué stitching and pattern may become 
misaligned.

• Since an outline is added, the pattern for an 

appliqué piece (when the appliqué setting is 
selected) will be larger than the original pattern. 
First, adjust the size and position of the pattern as 
shown below.

1

Embroidering area

2

About 1cm (approx. 1/2 inch)

3

Pattern size

a

b

c

Summary of Contents for Meridian 2





































































































































Reviews: