Note:
When the bobbin winder button is
pushed without pushing the bobbin winder
switch to the left, the following screen is
displayed for a few seconds.
Attention:
Since this machine is equipped
with an independent bobbin winder the sewing
speed controller does not effect the winding
speed. Keep fingers clear of the needle area
while winding the bobbin.
22
11.Remove the bobbin then cut the thread on
the thread cutter.
11
10.After the bobbin has wound a few turns stop
the machine and cut the thread near the hole
of the bobbin.
Continue winding the bobbin until it is full. The
motor stops automatically when the bobbin is
full.
10
8. Press the bobbin winding button.
9. When the bobbin winder switch is pushed to
the left and bobbin winder button is pressed,
the LCD screen will display the animation of
the bobbin winding.
8
9
Summary of Contents for Quest PLUS BLQ2-PL
Page 1: ......
