3. Select the buttonhole stitch.
Adjust the stitch width and the stitch length to
the desired width and density.
Position the fabric under the presser foot with
the front end of the buttonhole mark aligned
with the center line on the buttonhole foot.
4. Pull the buttonhole lever all the way down and
position it behind the bracket on the
buttonhole foot.
Note:
When you start to sew any button-
hole pattern before the buttonhole lever is
lowered, the LCD screen will show the
animated warning message to remind you
to lower the buttonhole lever.
PUSH
4
5. While lightly holding the end of the upper
thread, start sewing.
Note:
Gently guide the fabric by hand.
Before stopping, the machine will auto-
matically sew a reinforcement stitch after
the buttonhole is sewn.
5
PUSH
57
3
Summary of Contents for Quest PLUS BLQ2-PL
Page 1: ......
