UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
104
Satin stitching using the
sewing speed controller
A decorative stitch can be sewn by changing the
stitch width of a satin stitch. If the sewing machine is
set so that the stitch width can be adjusted using the
sewing speed controller, the stitch width can quickly
and easily be adjusted. In this case, the sewing speed
is adjusted with the foot controller.
a
Connect the foot controller.
• For details, refer to “Starting to sew” (page
50).
b
Attach zigzag foot “J”.
• For details, refer to “Replacing the presser
foot” (page 39).
c
Turn on the sewing machine, and then press
(Settings key) in the operation panel.
X
The settings screen appears.
d
Press
or
(Stitch length keys) until
is displayed.
X
The screen for specifying that the stitch
width can be controlled with the sewing
speed controller appears.
e
Press
or
(Stitch width keys) to select
.
To return to
, press
or
(Stitch
width keys).
X
The machine is now set so that the stitch
width can be controlled with the sewing
speed controller.
f
Press
(OK key) or
(Cancel/clear
key).
X
The initial stitch screen appears again.
g
Select stitch
24
.
• For details, refer to “Selecting stitching” (page
70).
h
While sewing, slide the sewing speed
controller to adjust the stitch width.
Slide the controller to the left to make the width
narrower. Slide the controller to the right to
make the width wider.
• Adjust the sewing speed with the foot
controller.
J
Narrower
Wider
Summary of Contents for Quilter's Choice BLQC2
