8 |
www.BabyLock.com
This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks
like the plug illustrated in sketch A above. A temporary adapter, which looks like the adapter illustrated
in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a
properly grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician. The gold colored rigid ear, lug, and the like,
extending from the adapter, must be connected to a permanent ground such as a properly grounded
outlet box cover. Whenever the adapter is used, it must be held in place by the metal screw.
Â
IMPORTANT
: In Canada, the use of a temporary adapter is not permitted by the
Canadian Electric Code.
To Use the Machine Safely
1. Carefully watch the needle when sewing. Do not touch the hand wheel, take up lever, needle,
or other moving parts.
2. Turn the machine off and unplug the cord in the following cases:
• when you have stopped using the machine
• when you replace or remove the needle or any other part
• when you check or clean the machine
• when you leave the machine unattended
3. Connect the machine directly to the wall outlet or to a surge protector that connects directly
to the wall outlet. Do not use extension cords.
To Increase the Life of Your Machine
1. Do not store this machine in areas exposed to direct sunlight or high humidity. Never use or store
the machine near a heater, an iron, a halogen lamp or other hot things.
2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring
powders can damage the case and the machine and therefore should never be used.
3. Do not drop or bump the machine.
4. Always consult the manual to replace or fix the hopping foot, needle or any other part of the
machine. If necessary contact an authorized Baby Lock retailer or the Baby Lock Consumer
Helpline (1-800-313-4110).
To Repair or Adjust the Machine
If the machine breaks down or needs adjustment, first check the troubleshooting chart in the appendix to
inspect and adjust the machine yourself.
For more product information and updates, visit our website at www.BabyLock.com.
The contents of this manual and product specifications are subject to change without prior notice.
Check for updated manuals at
www�BabyLock�com
