Changing the needle position
Changing the stitch length
This setting can be applied only to patterns 00-
04, 23-24 from Group 1-A, Group 2-B Patterns
00-02, Group 3-C Patterns 45.
The preset position is "4.5", center position.
When you press the stitch width adjustment key
"
", the needle position will move to the left.
When you press the stitch width adjustment key
" ", the needle position will move to the right.
The LCD screen width illustration indicates the
position of needle and number for easy reference.
"
"
the
"
"
Generally speaking, the thicker the fabric, thread
and needle, the longer the stitch should be.
To shorten the stitch length, press the stitch length
adjustment key
. For a longer stitch length,
press
stitch length adjustment key
.
BASIC STITCHING
Straight stitches and needle position
Zigzag stitches
Adjusting the stitch width
The maximum zigzag stitch width for zigzag
stitching is "9.0". However, the width can be
reduced on any pattern. The width
as you press the stitch
width adjustment key
from "0.0-9.0".
can be
increased or decreased
"
" or "
"
Note:
Some stitches have a limited stitch
width range.
Adjusting the stitch length
The density of zigzag stitches increase as the
setting of stitch length approaches "0.0". Neat
zigzag stitches are usually achieved at "1.0-2.5".
modate dense stitch formation.
Zigzag stitches with a short length (approximately
0.4) are referred to as a satin stitch. The cutout on
the underside of the RK satin stitch foot is designed
to accom
56
RK
R A
R A
Group A
Group A
Group A
04
01
02
03
05
05
06
07
00
Summary of Contents for Serenade BLSN
Page 1: ......
Page 119: ...021S2A0101 baby lock BLSN S20A IBBLSN Jul 10 ...
