100
b
Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1
Shows the angle of the pattern after a key is
touched to change it.
The pattern can also be rotated by holding down and
dragging a red point around the pattern.
• To return the pattern to its original angle, touch
.
c
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 98.
d
If necessary, touch
and then touch
to check the embroidering area.
For more details, refer to page 54.
e
After making the desired changes, touch
.
The embroidering settings screen appears again.
Example: Original angle
Rotates 90 degrees to the right
Rotates 10 degrees to the right
Rotates 1 degree to the right
Rotates 0.1 degree to the right
Rotates 90 degrees to the left
Rotates 10 degrees to the left
Rotates 1 degree to the left
Rotates 0.1 degree to the left
Moves the pattern in the direction of the arrow on
the key.
Moves the frame by 0.1 mm.
Moves the frame by 0.5 mm.
Moves at maximum speed when a key is held
down.
Touch this key to return the pattern to its original
angle.
Touch this key to close this screen.
1
