132
The thread colors assigned to each needle bar can be manually specified/managed. In addition, the
thread colors can be assigned to needle bars automatically and more efficiently than when the settings are
normally specified.
Convenience of the manual color
sequence
The manual color sequence is convenient when
the machine is being used under the following
conditions.
■
When using embroidery data that
has no thread color information,
such as with DST files
The thread spools to be used can easily be selected
for data with no thread color information. (For
details on the thread color information for DST files,
refer to “Colors of Tajima (.dst) embroidery data” on
page 250.)
■
When the same combination of
thread colors is always used
If specific thread colors are assigned to certain
needle bars, the thread color settings can be
changed with the needle bar number assignments,
even when the pattern is changed. The operation is
simplified if the same thread colors are always used.
■
When continuously sewing with the
same needle bar settings
If the settings are specified normally, the needle bar
settings are canceled when the embroidering
settings screen appears after sewing stops. However,
with the manual color sequence, the needle bar
settings continue to be applied unless the pattern is
deleted or the machine is turned off.
This is useful if the same pattern is to be sewn
continuously multiple times.
Specifying the manual color
sequence
a
Touch
, and then display page 5 of the
settings screen.
b
Touch
, and then select the manual
color sequence.
• When the embroidery machine is purchased, “OFF”
is selected.
c
Touch
to return to the previous
screen.
→
The icon for the manual color sequence appears in
the screen.
Selecting/Managing Thread Colors for Each Needle Bar
(Manual Color Sequence)
Note
• The manual color sequence cannot be
changed while operations are being
performed in the embroidering screen.
