13
This manual is constructed as described below. Before using the machine, check the procedures
described with the numbered titles in the title list on the first page of chapter 2. This shows the sequence
of these basic operations.
Read before use
Chapter 1: Getting Ready
The setup of the embroidery machine and the
various preparations required before starting to
sew are described in this chapter.
Chapter 2: Embroidering Tutorial
This chapter describes the basic embroidering
operations in order—from turning on the machine
and sewing a pattern to finishing sewing. Follow
the steps of the tutorial to embroider a pattern and
master the operation of this embroidery machine.
Chapter 3: Other Basic Procedures
This chapter provides explanations on operations
other than those described in chapter 2, such as
sewing a pattern with eleven or more colors, and
other necessary operations, for example, changing
the needle.
Read when additional
information is required
Chapter 4: Embroidering Settings
This chapter contains descriptions on the various
embroidering settings, which make editing
patterns simple.
Chapter 5: Selecting/Editing/Saving Patterns
This chapter provides details on selecting, editing
and saving embroidery patterns.
Chapter 6: Basic Settings and Help Feature
This chapter contains descriptions on the use of
the settings key and the machine operations key.
Details on changing the basic embroidery
machine settings and viewing operations on the
LCD will be provided.
Chapter 7: Appendix
This chapter provides descriptions of techniques
for various embroidering operations, pointers for
creating beautiful embroidery, and details on
maintenance procedures and corrective measures
that should be taken when a problem occurs.
Searching for information
■
Searching the manual
By title
Check the descriptions at the left for the contents of
each chapter, and then check the table of contents.
By keyword
Search the index at the end of this manual. Look for
the desired keyword, and then refer to the page that
is indicated.
By screen
Descriptions of the keys and other information that
appear in the main LCD screens are provided in the
tables on pages 70 to 79. For details, refer to the
page that is indicated.
By condition
Various possible conditions and the corresponding
operations are described on page 80. For details,
refer to the page that is indicated.
■
Searching the machine
This machine is equipped with a help feature.
Learning how to perform an operation
Touch the machine operations guide key, and then
check for the desired information. (Refer to “Using
the Machine Operations Guide Key” on page 235.)
Manual Structure
