SELECTING/EDITING/SAVING PATTERNS
213
5
b
Following message appears in step
m
if the
next pattern or affixed positioning stickers
are close to being out of the embroidering
area. Follow the instructions and then touch
.
1
Embroidering area
1
Pattern to be embroidered next
2
Embroidery sheet
→
The camera detects the two positioning stickers.
c
After the sticker position is detected, touch
, and then remove the stickers.
d
Affix the two positioning stickers again
according to the on-screen instructions so
that the next pattern or positioning marks
can fit in the embroidery area.
→
Touch
so that the camera detects the first
positioning sticker.
Note
• When referring to steps
a
through
l
,
make sure you select the pattern position to
reflect this exercise.
1
Note
• If the following message appears, rehoop
the fabric as indicated in the screen, and
then touch
.