BASIC SETTINGS AND HELP FEATURE
227
6
Changing the background colors
of the embroidery patterns or
thumbnails
The background colors of the pattern display area
and pattern thumbnails. Depending on the pattern
color, select the desired background color from
the 66 settings available. Different background
colors can be selected for the pattern display area
and pattern thumbnails.
When the embroidery machine is purchased,
white color is selected.
The background color settings can be specified
from page 1 of the settings screen.
a
Touch .
b
Select the background color from the 66
settings available.
1
Selected color
2
Touch
to return to the settings screen.
Specifying jumpstitch trimming /
“DST” jump codes for trimming
You can specify whether or not jumpstitches are
cut. In addition, when using Tajima embroidery
data (.dst), you can specify whether or not the
thread is cut according to the specified number of
jump codes.
ON: The machine cuts the upper and bobbin
thread before the jumpstitch. When Tajima
embroidery data (.dst) is used, the machine
converts the “jump” code to a trim code, based on
the number specified on the next line.
OFF: The machine does not cut either a jumpstitch
or the “jump” code in Tajima embroidery data
(.dst).
When the machine is purchased, “ON” is selected
and the number of jumps is set to “3”.
The “DST” thread trim settings can be specified
from page 2 of the settings screen.
a
Touch
or
to select the desired
setting.
Memo
• The setting remains selected even if the
machine is turned off.
1
2
Note
• If the setting is changed from the previous
setting, the new setting is only applied to
the next embroidery.
Note
• This setting is not applied to the trimming of
threads between characters in alphabet
patterns. (Refer to “Trimming the threads
between characters” on page 183.)
Memo
• The number of jump codes cannot be
specified for data other than Tajima
embroidery data (.dst).
