248
e
Touch .
f
Touch
(unlock key), and then press
the start/stop button to begin embroidering.
g
Correct thread tension. From the wrong
side of the fabric, the bobbin thread should
be about one third of the stitch width.
Sewing a pattern aligned with a
mark on the fabric
By specifying the beginning of stitching and the
end of stitching, the exact position of the pattern
can be checked.
For example, when sewing text along a line in the
fabric pattern, the beginning of the stitching can be
set in the lower-left corner so that the position can
be checked, and then the beginning of stitching
can be reset. Next, the beginning of stitching can
be set in the lower-right corner to check the
position. The straight line connecting the first point
and the second point is the baseline for the text. If
the baseline that the text follows leaves the fabric
pattern, the embroidering position can be
adjusted.
a
Touch
in the embroidering settings
screen.
b
Set the beginning of stitching in the lower-
left corner.
→
The frame moves so that the needle drop point
aligns with the beginning of stitching.
Note
• If adjustment is necessary, refer to
instructions on page 124, 125.
