270
n
Adjust the brim so that it maintains a
rounded shape.
o
While pulling the lever toward you that is
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the left. After the cap frame has been
rotated 90°, release the lever to lock the
cap frame in place.
1
Handle
2
Lever
p
Pull the ends of the cap out from the center
to remove any slack.
q
Use the clips to secure the cap.
Attach the clips with their handles folded inward. If the
handles are pointed outward, they may be hit by the
machine’s presser foot.
1
Clips
r
While pulling the lever toward you that is
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the right.
After the cap frame has been rotated 180° and the
brim points to the right, release the lever to lock the
cap frame in place.
1
Handle
2
Lever
s
Pull the ends of the cap out from the center
to remove any slack in the same way as the
other side.
