WARNING:
All top rails MUST be
straight and locked in position or child may
become entrapped and suffocate.
See figure 9 and 10.
5. Place mattress in Playard with padded side up (Fig. 11).
NOTE: DO NOT insert mattress if using bassinet feature. Go to
bassinet instructions.
6.
Feed the 6 hook and loop straps (found underneath the mattress), 3 on
each end of the mattress pad, through the slots on the bottom of the
sides of the Playard. Fasten the hook and loop tabs to the underside
of Playard to prevent the mattress from moving (Fig. 12) (Fig. 13).
WARNING:
To prevent child from
suffocating, hook and loop straps MUST be
secured to underside of Playard.
7. To operate the brakes on the wheels, press downward on the brake
lever as shown in figure 14. To release, lift upward on the lever.
Playard assembly is now complete and ready to use.
4
Figure 4
Left
Right
Figure 6
Left
Figure 5
Right
Insert
axle from
outside
Insert
axle from
outside
Outside
Inside
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
