background image

31

32

9.0

 Vehicle Seat Belts

9.0 

Vehicle Seat Belts

at one end. This type of seat belt system will not 

adequately restrain the Car Seat. (Fig 31-2)
Passive Restraint – Lap or Shoulder Belt 

Mounted on Door 

DO NOT use a seat belt that is connected to the 

door in any way. These types of seat belts are 

designed to automatically surround the occupant 

when the door is closed. This type of seat belt will 

NOT adequately restrain the Car Seat. (Fig 32-1)
Passive Restraint – Lap Belt with Motorized 

Shoulder Belt 

DO NOT use a shoulder belt that moves 

along a track. These systems typically move 

to surround the occupant when the door is 

closed. This type of belt system will NOT 

adequately restrain the Car Seat. (Fig 32-2)  
Lap Belts Forward of Seat Crease 

DO NOT use a seat belt that is anchored on the 

seat more than 2 inches forward of the crease 

between the seat bottom and the seat back. 

This type of seat belt anchors the Car Seat 

too far forward and the Car Seat will not be 

safely restrained in the vehicle. (Fig 32-3) 

9.3 UNSAFE Seat Belt Systems

DO NOT use the following types of seat belt systems with the Car Seat. 

These belt systems will not hold the Car Seat securely in place at all times. 

In addition, the Locking Clip provided with this product will NOT make these 

belt systems safe to use.  NEVER USE unsafe vehicle belts systems!
Note: LATCH can be used IN PLACE OF the following 

unsafe vehicle seat belts systems if your vehicle 

is equipped with LATCH anchorage system.
Lap Belts with Emergency Locking Retractor (ELR) 

DO NOT use a lap belt that stays loose after installed 

and locks only in a crash or sudden stop. These lap 

belts utilize an Emergency Locking Retractor (ELR) 

and are often found in combination with motorized 

shoulder belts. Because these belts will allow the Car 

Seat to move about on the vehicle seat, the chance 

of the Car Seat being out of the proper position in 

a crash is very high. Accordingly, DO NOT use the 

Car Seat with this type of seat belt system. Please 

see your vehicle’s dealer or owner’s manual for 

information on converting this seat belt system to one 

that is acceptable for use with a Car Seat. (Fig 31-1) 
Combination Lap/Shoulder Belt 

with Retractor 

DO NOT use a lap/shoulder belt system if the 

lap belt and shoulder belt each have retractors 

31-1

32-1

32-2

32-3

31-2

Summary of Contents for FastBack











































Reviews: