7
8
ASSEMBLY
ASSEMBLY
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
9)
• Attach each of the Casters to the
high chair leg (Fig. 9). Snap casters
into Bottom of the leg. Check that all
four Casters are securely fastened
to the High Chair.
REMOVABLE BASKET
(if equipped)
WARNING:
The
maximum weight that can be
carried in the storage basket
is 5 pounds (2.27kg).
NOTE:
Certain Models will have a Basket
underneath the seat for storage. These
Models will be packaged with the Basket
already attached to the Seat Base.
The basket is preassembled. You may
remove or reattach the basket using the
4 snap closures and the corresponding
slots underneath the seat base.
6)
• Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it
locks in the highest position (Fig. 6).
7)
• Insert the Legs into the ends of the
front tube of both the right and left
Upper Frame Assemblies (Fig. 7).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
8)
• Insert another Leg into the ends of
the rear tube of both the right and left
Upper Frame Assemblies (Fig. 8).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
Fig. 9
Fig. 8
Lock Buttons
Hole
Fig. 7
Hole
Lock Buttons
Fig. 6
Release Handle
