WARNING
WARNING
3
4
3
4
ASSEMBLY
ASSEMBLY
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
IMPORTANT!
To ensure safe operation of your product, please
follow these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT!
Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT!
Always check that the high chair is locked in the
open position before using.
CAUTION:
Only hold the top of the back rest during assembly.
Placing fingers on the frame during folding and unfolding can result in finger
entrapment or injury.
ATTENTION:
Carefully remove parts from box. Check that you have all the parts for this model
before assembling the high chair.
Fig. 1a
Fig. 1e
Fig. 1d
Fig. 1b
Fig. 1c
NOTE:
Continue to extend and the frame will lock into place when fully
extended (Fig 1b).
Hook the lower D rings: 2 harness straps of the seat both
loop around the rear bar under the seat. The crotch strap for the harness
loops around the front bar under the seat (Fig 1c). Strap the D rings for the
backrest to the rear bars (Fig 1d). Strap the panels around the frame using
the snap button fasteners (Fig 1e).
TO ASSEMBLE FRAME
1)
•
Always keep the rear feet on the
ground while extending the High
Chair. Hold the top of backrest with
one hand while pushing the feet
with the other and pull up gently
(Fig 1a).
•
NEVER
use this product if there are any loose or missing fasteners, loose
joints, broken parts, or torn mesh/fabric. Check before assembly and
periodically during use. Contact Baby Trend Customer Service at 1-800-
328-7363 for replacement parts, repair or instructions.
NEVER
substitute
parts.
