RESPIRO
™
INSTALLATION TIP
RESPIRO
™
INSTALLATION TIP
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
2
3
• Starting on the end with the
closed track, partially zip the
Sleep Surfaces together,
insert the zipper pull into the
zipper insertion and close
only 2 inches (Fig 1e).
2)
•
Expand the first side of the
Respiro™ Frame completely.
Place one hand on the corner
of the Respiro™ Mattress
and your other hand on the
trigger handle (Fig 2a).
NOTE:
Always grasp the
trigger handle from the outer
edge. Do not engage the
trigger handle from the inner
mechanism (Fig 2b).
Fig. 1e
Fig. 2a
Fig. 2b
Fig. 3b
Fig. 2c
Fig. 3a
Lock Position
Posición para asegurar
Position verrouillée
• Close the zipper completely.
Place the zipper pull flat on the
zipper to lock into position
(Fig 2c).
3)
•
On the end with the open track
of The Respiro™ Crib Mattress,
begin the process again to
ensure the Sleep Surfaces are
tightly pulled through the frame.
• Tug the Sleep Surfaces firmly
on the top and bottom sides to
be sure the Sleep Surfaces are
set in correctly (Fig 3a).
IMPORTANT:
Be sure that
the tubing goes all the way
through the tracks. Tug the
Sleep Surfaces firmly on the
opposing side to ensure that
the Sleep Surfaces are set in
correctly
(Fig 3b).
Open Track
