background image

Page 4 of 9

IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS

WARNING: 

ENTRAPMENT/ STRANGULATION HAZARD

Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in serious injury or death.

NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle a child.

The mattress intended for use on the bed shall be a full-size crib mattress having minimum
dimensions of 51 

5

8

  inches (1310 mm) in length, 27

1

4

 inches (690 mm) in width and 4 inches (100

mm) in thickness, not exceeding 6 inches (152 mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to

avoid the formation of a gap between the mattress and the bed that could cause an entrapment.

DO NOT 

place bed near windows where cords from blinds or drapes may strangle a child.

DO NOT

 place items with a string, cord, or ribbon around a child's neck, such as hood strings or

pacifier cords.

A child using the toddler or day bed shall be at least 15 months of age and shall not weigh more than
50 lbs (22.7 kg).

Summary of Contents for 367-19










Reviews: