Repeat the procedure with the other rail. The Headboard Panel (A) will now stand on it's
own with the rails supporting it.
Insert the side rail hooks into the slots in the Footboard (D) and use the method described
above (as shown in diagram 1).
2. Tighten the Support Legs (J) to the Slat Roll (F) (as shown in diagram 2).
3. Lay the Slat Roll (F) in between the Side Rail (E) and secure with Wood Screws (3) (as
shown in diagram 3).
4
. Secure the Canopy Posts (B) & (C) to the top of bed posts.
5. Insert Connecting Bolts (1) and Wood Plugs (4) to the Canopy Posts (B) & (C). Then secure
the Canopy Rails (G) & (H) to the canopy posts. Place Camlock Wheel (2) into the holes
inside of the canopy rails by aligning the arrow sign of the camlock wheel to the connecting
bolt. Twist to tighten in counter clockwise direction using Phillips head screwdriver (not
provided).
Repeat the same procedure to the other 3 connection points of canopy set.
Diagram 3
Diagram 1
Diagram 4
