![background image](http://html1.mh-extra.com/html/babybee/pod/pod_product-manual_3052880005.webp)
5
P R O D U C T M A N U A L
• Before use in “co-sleeping mode” (fixed to bed) make sure the product
is properly anchored and positioned.
• When the product is used in “co-sleeping mode” (fixed to bed), before
laying the child in it, make sure that the fastening belt is hooked and
tensioned properly, the product must be secured to the adult bed and
no gaps between the lower side of the co-sleeper and the adult bed/
mattress must be present. If there is any gap between the co-sleeper
and the adult bed DO NOT use the product.
• The product must always be placed on a horizontal surface. Never
leave the product on an inclined surface with the child inside of it.
• Young children should not be allowed to play unsupervised in the vacinity
of the crib.
• Placing additional items in the product may cause suffocation.
• Do not use the product without the frame.
• Keep the fastening belt away from the reach of children.
• Only use the mattress supplied by the manufacturer.
• The thickness of the uncompressed mattress shall not exceed 25mm. The
upper surface of the non compressed mattress must be at least 120mm
lower than the upper surface of the lowest side of the bedside sleeper.
• Do not use more than one mattress in the product.
• Do not leave any object inside the product that could reduce its depth.
• Do not position the product near walls and obstacles to prevent
entrapment hazards.
S A F E T Y F I R S T
P O D P R O D U C T M A N U A L