Do’s & Don’ts
direction
of current
USB-C line
DC connector
USB-C connector
computer
power bank
adapter
Insert the DC connector into the DC hole
on the machine (Adapter input: 100-240V,
50/60 Hz, Output: 5V / 1 Amp), then insert
the USB-C connector into the adapter.
Insert adapter plug into power jack.
Please dry water on the silicone diaphragm after cleaning
and sterilizing.
Do not sterilize the PVC tube (this is an air
tube and does not come into contact with any milk).
MAINTAIN AN UPRIGHT POSITION WHILE PUMPING
IN ORDER TO PREVENT BACKFLOW. DO NOT LIE DOWN.
Important
• BabyBuddha breast pump is not heat resistant, keep away from heat sources.
• Do not reach for pump if it has fallen into water. Unplug immediately.
• Never operate pump if it has a damaged cord or plug. If damage is found, discontinue use
and contact BabyBuddha Products at support@babybuddhaproducts.com
• Only use AC adapter supplied with the pump.
• Never use a damaged device and replace damaged or worn parts as indicated.
• Do not use device while drowsy or sleeping.
• Do not use device while driving.
• Replace tubing immediately if mold is visible. Visit www.babybuddhaproducts.com to
purchase replacement parts.
• Wash all parts that come into contact with breast or breast milk.
• Always disconnect unit from wall socket outlet.
• Do not expose unit to direct sunlight.
• If you feel pain while using unit, turn pump off and remove the flange immediately.
• Contact your healthcare professional if you continue to experience these pains.
• Wash hands thoroughly with soap and water before touching breast pump,
components, and breasts.
• Separate and wash all components that come into contact with breast milk after each use.
• Discomfort may exist during first use, but using a breast pump should not cause pain.
• Do not thaw frozen breast milk in the microwave or in boiling water.
WARNING: To avoid fire, or serious burns:
CAUTION: Can lead to minor injury
Silicone Diaphragm
PVC tube
